EPSON

Making General Network Settings with LCD panel

You can set up general network settings for your printer using the printer’s control panel.
Note:
This feature is not available for all printers or may not be enabled.
This setting, and the DNS server/Proxy server address setting, is not available for all printers or may not be enabled.
Turn on the printer.
Enter the Setup mode.
Select Network Settings (or Wi-Fi Settings).
Select General Network Setup (or Manual Wi-Fi Setup).
Confirm the printer name and modify it if you want.
The printer name is used to access or identify the printer on the network.
Note:
The default setting is “EPSONXXXXXX” (X: Last 6 digits of the MAC address). To change the printer name, retype the text.
Set TCP/IP Setup settings.
Normally, the broadband router or access point will automatically allocate an IP address to the printer using the DHCP function. If your router (or access point) DHCP function is on, select Auto.
Note:
To assign a unique IP address to the printer, select Manual, and enter the IP Address, Subnet Mask and Default Gateway.
Set the DNS server. DNS server and proxy server settings are not available for all printers or may not be enabled.
Normally, the broadband router or access point will automatically allocate a DNS server address to the printer. To use this option, select Auto.
Note:
To specify the DNS server address, select Manual, and enter the Primary DNS Server and Secondary DNS Server addresses.
Set the proxy server address.
Select Do Not Use.
Note:
To use the proxy server, select Use, and enter the Proxy Server address and Port.